RouterBest

How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI

NC

To configure DHCP VLAN Relay on L2 Managed switches using the new GUI, follow the steps below:

  1. Log in to the switch's web interface using a web browser and enter the username and password.

  2. Go to the "Advanced" tab and click on "DHCP VLAN Relay" in the left menu.

  3. Click on "Enable DHCP VLAN Relay" to enable the feature.

  4. Select the VLAN you want to configure by clicking on "VLAN Configuration" and then selecting the VLAN ID.

  5. Enter the IP address of the DHCP server and the gateway address of the VLAN.

  6. Select the interface of the switch that connects to the DHCP server.

  7. Click on "Apply" to save the settings.

  8. Repeat steps 4-7 for all the VLANs you want to configure.

  9. Click on "Save" to save the changes.

  10. Verify that DHCP VLAN Relay is working by checking the DHCP server logs. You should see the DHCP requests and responses from the clients connected to the VLANs you configured.

  11. Save the configuration to the switch's memory by clicking on "Save" in the top right corner.

That's it! DHCP VLAN Relay is now configured on your L2 Managed switch using the new GUI.


Facebook: https://www.facebook.com/routerbest

Twitter: https://twitter.com/routerbestcom

Previous How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI

Next How to configure DHCP Interface Relay on L2 Managed switches using T1600G-52TS