To configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI, follow the steps below:
Log in to the switch's web interface using a web browser and enter the username and password.
Go to the "Advanced" tab and click on "IGMP Snooping" in the left menu.
Click on "Enable IGMP Snooping" to enable the feature.
Select the VLAN you want to configure by clicking on "VLAN Configuration" and then selecting the VLAN ID.
Click on "Apply" to save the settings.
Go to the "IGMP Group Configuration" section and click on "Add" to add a new group.
Enter the multicast IP address and select the VLAN you want to associate with the group.
Click on "Apply" to save the settings.
Repeat steps 6-8 for all the multicast groups you want to configure.
Click on "Save" to save the changes.
Verify that IGMP Snooping is working by checking the IGMP table. Go to the "IGMP Snooping" section and click on "IGMP Table". You should see the multicast groups you configured and the ports associated with them.
Save the configuration to the switch's memory by clicking on "Save" in the top right corner.
That's it! IGMP Snooping is now configured on your L2 Managed switch for your IPTV network using the new GUI.
Facebook: https://www.facebook.com/routerbest
Twitter: https://twitter.com/routerbestcom