In this article, I show you How to bridge all Lan on Mikrotik router. A bridge lan be useful if you require more hardware ports for the switch on a Mikrotik router.
Mikrotik - Basic Configuration ( PPPoE, DHCP, NAT, IP LAN )
For example, I will create a bridge lan with 3 ports, port 2, port 3 and port 4.
Add members to the bridge
Go to "Bridge" -> "Bridge" ->"+", enter a Name, then click "OK".
Go to "Ports" -> "+", Interface select "ether2", click "OK".
Click "+", Interface select "ether3", click "OK".
Click "+", Interface select "ether4", click "OK".
Configure IP address to the new bridge
Go to "IP" -> "Addresses".
Address : 192.168.1.1/24, Interface : bridgeLAN
Configure DHCP server to the bridge
Go to "IP" -> "DHCP server", click "DHCP Setup", DHCP Server Interface : bridgeLAN, then click "Next".
DNS Servers : 8.8.8.8
To access the internet you need to configure WAN, NAT, Static Route. And you have more reference in the description of this article to configure it.
Facebook: https://www.facebook.com/routerbest
Twitter: https://twitter.com/routerbestcom
Tags: Mikrotik