To configure MAC ACL on TP-Link Smart and L2 Managed Switches using T1500G-10PS, follow the steps below:
Log in to the switch's web interface using a web browser and enter the username and password.
Click on "Advanced" and then "ACL" in the left menu.
Select "MAC" from the ACL Type drop-down menu and click "Go".
Click on "Create" to create a new MAC ACL rule.
Enter a name for the rule in the "Rule Name" field.
Choose "Permit" or "Deny" in the "Action" drop-down menu.
Enter the MAC address that you want to permit or deny in the "Source MAC Address" field.
Enter the mask for the MAC address in the "Mask" field.
Click on "Apply" to save the rule.
Repeat steps 4-9 to create additional MAC ACL rules.
Click on "Apply" to save all the rules.
To apply the MAC ACL to a port, click on "Port" in the left menu.
Select the port you want to configure from the list.
Click on "Add" in the "MAC ACL" section.
Select the MAC ACL rule you want to apply from the drop-down menu.
Click on "Apply" to save the configuration.
Repeat steps 12-16 to apply the MAC ACL to additional ports.
Click on "Save" to save the changes.
That's it! MAC ACL is now configured on your TP-Link Smart and L2 Managed Switch using T1500G-10PS.
Facebook: https://www.facebook.com/routerbest
Twitter: https://twitter.com/routerbestcom