How to configure TL-WR902AC as Client


To configure the TP-Link TL-WR902AC as a client, follow these steps:

Connect your computer to the TL-WR902AC's Wi-Fi network. The default network name (SSID) and password can be found on the label at the bottom of the router.

Open a web browser and enter the router's IP address ( into the address bar. Press Enter.

You will be prompted to enter the username and password. The default username and password are both "admin".

Once you are logged in, click on "Wireless" on the left-hand side of the page.

Click on "Wireless Settings" and select "Client" mode from the drop-down menu.

Enter the SSID and password of the Wi-Fi network you want to connect to as a client.

Click "Save" and wait for the router to reboot.

Once the router has rebooted, you should be able to connect to the Wi-Fi network as a client. You can check the connection status on the "Wireless" page.

That's it! Your TL-WR902AC is now configured as a client and can connect to another Wi-Fi network.



Tags: TL-WR902AC