To manage the TD-W9960 modem router via Local Management and Remote Management, follow these steps:
Log in to the router: Open a web browser and enter the IP address of the router into the address bar. Log in to the web interface using your administrator credentials.
Navigate to the management settings: In the web interface, go to "Advanced Setup" > "System Tools" > "Management" to access the management settings.
Enable Local Management: Under the "Local Management" section, check the "Enable" checkbox to enable local management. You can also change the default HTTP and HTTPS ports and set an access password for local management.
Enable Remote Management: Under the "Remote Management" section, check the "Enable" checkbox to enable remote management. You can also specify the IP address range that is allowed to access the router remotely, change the default HTTP and HTTPS ports, and set an access password for remote management.
Save the changes: Click the "Save" button to save the management settings.
Once local and remote management are enabled, you can access the router's management interface from a web browser on a computer or mobile device on the local network or from a remote location. To access the router's management interface from a remote location, enter the router's WAN IP address in a web browser and specify the configured HTTP or HTTPS port, as well as the access password if one is set. It's important to keep the access password secure to prevent unauthorized access to the router's management interface.
Facebook: https://www.facebook.com/routerbest
Twitter: https://twitter.com/routerbestcom
Tags： TD-W9960
