In this article, I will show you the Parameters and Introduction of ASUS WL-700gE wireless router.
System requirement
To use the WL-700gE Wireless Router, you must have:
An ADSL or Cable modem and an account for these service;
A computer with an Ethernet adapter pre-installed for connecting the local area network (LAN);
A wireless client with a pre-installed 802.11b/g wireless adapter, such as PDA or notebook computer;
Your computer and the wireless client must have installed TCP/IP protocol component and a Web browser.
Package content
Check your wireless router package for the following items:
WL-700gE Wireless Router x 1
White antenna (2dbi) x 1
Power cable x 1
RJ-45 Ethernet cable (straight-through) x 1
Support CD (with full version user manual) x 1
Router stand x 1
Quick start guide x 1
Rear panel
RESET
Push the RESET button for 10 seconds to restore the factory default.
EZSetup
This button is for using EZSetup setting wizard.
Front panel
PWR (Hard disk power indicator/ power switch)
OFF Hard disk unmounted or no power
ON Hard disk mounted
*Push this button and wair for 10 seconds to shut down the hard disk.
COPY
This button is for copying the data in your USB storage to the hard disk of WL-700gE.
READY
OFF No power
ON The system is powered on and in ready state
Flashing slowly USB storage inserted to the USB2.0 port
Flashing quickly Copying data from USB storage
LAN (Local Area Network) 1-4
OFF No power
ON An Ethernet device is connected to the port
Flashing Transmitting data via wired LAN
AIR (Wireless LAN)
OFF No power
ON Wireless LAN ready
Flashing Transmitting data via wireless LAN
WAN (Wide Area Network)
OFF No power
ON Connected to ADSL or Cable modem
Flashing Communicating with WAN
USB2.0
For connecting USB storage, such as USB hard disk and USB flash.
Facebook: https://www.facebook.com/routerbest
Twitter: https://twitter.com/routerbestcom
